• (1) KX65 Rear Caliper Bracket (Billet Aluminum).
• (1) KX65 Master Cylinder Bracket (Billet Aluminum) & Four 6mm x 1 bolts for the Master cylinder to mount to the bracket and the bracket to mount to frame.
• (1) Hose clamp to mount overflow line to the side of the Clutch side cover  to route line to the left side radiator shroud. Also included is a 5mm screw and oversized washer to mount the resi bottle to the Coil mount. Comes with extended Overflow Line.
• Comes with Extended Overflow Line for Remote Resi to be relocated
• (1) Left side(Sprocket side) Wheel spacer (Replaces the OEM wheel spacer)

NOTE: These Items are needed for this adaptor kit to bolt onto your KLX110:

• Complete KX65 Rear Wheel with OEM Spacers and Dust Covers (Or KX65 after market wheel)
• (1) OEM Master Cylinder for a KX65/RM65, KX85, KX100, or YZ85,, all Mastercylinders will work.
• (1) OEM Caliper for a KX65/RM65, KX85, KX100, or YZ85
• (1) An extended Brake Line
• (1) KX65 Rotor and (4) OEM Bolts to secure the rotor to the hub
• (1) KX65 Sprocket 
   

NOTE: If you want to run a CR or YZ Integrated Mastercylinder you can But you will have to grind the STR Bracket down so the mastercylinder will fit flush. The YZ250F/450F mastercylinder is what we run on our bikes and can be viewed on the bike above.

 

 NOTE: Item is Back in Stock as of September 19, 2009 (50 on hand) 

 

 

 -KX65 Rear Disc Brake Adapter Kit Instructions-

 

-KX65 Rear Brake Line Routing Instructions-

Option (if applicable):